Boral Shingle Repair Nationwide

Boral Shingle Repair: The Dallas Owner’s Guide

Boral shingle repair in Dallas typically runs between $350 and $900 installed, depending on how many shingles failed and what the decking underneath looks like once we pull the damaged pieces. We stock Boral-compatible replacement shingles on our trucks and can usually complete a standard repair in one visit, same week in most Dallas neighborhoods.

Call (903) 499-4441

Most Dallas homeowners discover a Boral shingle problem the same way: after a spring hailstorm or a windy March afternoon, they find granules in the gutter or a shingle tab lying in the yard. Boral makes a heavier, thicker shingle than most competitors, which handles Texas heat well, but the same North Texas weather that beats on every roof beats on Boral too. The failure usually starts small: a lifted corner, a cracked tab, a nail that worked loose. Then water finds the gap. By the time you see a ceiling stain inside, the repair is no longer just the shingle.

Which Boral Models This Applies To

Our Boral shingle repair work covers the full Boral product line, including Lamarite slate and shake profiles, SteelStone, and the Boral concrete and clay tile systems that went onto a lot of Dallas homes in the last 20 years. The key to getting the right replacement shingle is matching the profile, not just the color. Boral changed profile dimensions across production years, and a shingle that looks close on the ground will not seat correctly if it’s from a different generation of tooling.

If you still have the original packaging or a bundle label, that’s the fastest path: the label carries the profile code and production date. No label? We measure the exposed tab width and the overall length, then check the texture pattern. Boral’s wood-shake profiles have a distinctive grain depth that differs from their slate profiles, and using the wrong one is the most common mistake we see on homes where someone took a generic approach. Brennan Roofing Co Dallas is an independent roofing contractor, not a Boral dealer or affiliate. When a Boral OEM shingle is no longer available, we source quality aftermarket equivalents that match the profile and color, and we always tell you which one we’re using before we install it. Price transparency is part of the deal.

Signs Your Boral Shingle Repair Is Failing

• Granules collecting in gutters or at downspout outlets. Boral shingles shed some granules early in their life, but steady granule loss after year five usually means the asphalt layer is oxidizing faster than it should, often from trapped heat or poor attic ventilation. Dallas attics routinely hit 140 degrees in August, which accelerates the breakdown.
• Lifted or curled shingle corners. The adhesive strip that holds the tab down fails before the shingle itself does. High wind gets under the loose tab and folds it back, and once it creases, it will not reseat. We see this most often on the western and southern roof slopes in Dallas, where the sun pounds hardest.
• Cracks running across the shingle face. Thermal cycling is the cause. Dallas roofs move through 60-degree temperature swings in a single spring day, and older Boral shingles that have lost flexibility will crack rather than flex. A cracked shingle is a direct path for water, and it’s not a repair you want to postpone.
• Stains spreading on the ceiling or along a wall. By the time water shows up inside, it has already traveled through the shingle, under the underlayment, and across the decking. The stain you see is usually not where the leak is. We trace it back with a hose test and find the actual entry point, which is often several feet uphill from the interior stain.
• Nails backing out or missing caps. Boral’s heavier profiles put more stress on fasteners than a standard asphalt shingle. A nail that works loose leaves a hole and a loose shingle, and in a hailstorm, that shingle becomes a projectile. During an inspection, we check fastener placement and pattern, not just the shingle surface.

Replacement Cost & What’s Included

In the Dallas market, a Boral shingle repair runs between $350 and $900 installed for most jobs. A single damaged shingle replacement lands at the lower end: $150 to $250 in labor plus the shingle cost. A repair that requires shingles, new underlayment, and possibly a section of decking replaced will push toward the upper end of the range. If we have to reflash a pipe boot or a valley at the same time, that adds $200 to $400 depending on the detail of the flashing.

What drives the price range is what we find underneath. The shingle itself is not the expensive part. The expensive part is the water damage you can’t see until the old shingle comes off. We give you a written price before we lift a tool. It covers parts, labor, and any fasteners or sealant the repair calls for. If the price needs to change because the decking underneath is rotted, we stop and show you before any additional work happens. No line items appear after the fact. The entire repair is backed by our 365-Day Done Right Promise: in writing, for one full year, and we come back at no charge if it fails within that period.

DIY or Call Us?

If you want to know whether your Boral shingle is failing, you can safely check from the ground: look for lifted corners, missing tabs, and granules at the gutter. If you have a single-story roof with a shallow pitch and you’re comfortable on a ladder, you can get close enough to see cracks and fastener issues. What we advise against is pulling shingles yourself. Boral profiles are heavy, and the sealant bond is strong. Forcing a shingle free without the right technique damages the surrounding shingles, and that turns a $400 repair into a $1,800 repair fast.

Safety matters here. Walking a Dallas roof in the summer is not like walking a roof anywhere else: the surface temperature on a Boral shingle can exceed 150 degrees, and that heat makes granules slippery. We send background-checked, uniformed technicians who do this every week, with the right shoes, the right harnesses, and a spotter. If you suspect a shingle failure, call us at (903) 499-4441 and we’ll schedule an inspection. Travis Oakley has been on Dallas roofs long enough to know which calls need him on site, and he shows up when they do. A roof either keeps water out or it doesn’t, and everything else is just conversation.

FAQs