Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Why Dallas Homeowners Choose GAF Roofing
Brennan Roofing Co Dallas provides independent GAF roofing repair, replacement, and inspection across Dallas, and we work on GAF products every week. We are not a GAF-authorized contractor, and we never claim to be. What we bring instead is thousands of squares of hands-on GAF experience across Dallas neighborhoods, from Oak Cliff bungalows to two-story traditionals in Lake Highlands. We know how GAF Timberline, Grand Sequoia, and EverGuard lines actually behave under North Texas hail, heat, and wind, and we repair them without manufacturer red tape. Call (903) 499-4441 for a free estimate on any GAF roof.
Dallas roofs take a beating that most roofing products never see elsewhere. Hail Alley storms, summer days over 100°F, and a housing stock full of 1970s through 2000s composition shingle roofs mean GAF products here age differently than they do in Ohio or Georgia. That local reality drives how we diagnose and fix every GAF roof we touch.
Why Trust Brennan Roofing Co Dallas for Your GAF Roofing?
Our crews work on GAF roofs constantly. That repetition builds a specific kind of knowledge you can’t get from a training video. We know which Timberline granule patterns show normal UV wear versus hail impact. We know where EverGuard TPO seams fail first on Dallas flat roofs after a hot summer. We know what a Grand Sequoia nail pull-through looks like at the eaves versus simple shingle lift.
Travis Oakley, our owner, learned roofing at Los Angeles Trade-Technical College and has spent decades putting roofs on across the Southwest. He keeps a worn copy of the local building code in his truck and has probably read it more times than most people read anything. When a GAF roof in Dallas fails, Travis or one of our background-checked, uniformed technicians diagnoses the actual cause before any price goes on paper. That’s the Garrison Standard: written price before any work starts, a live person answering the phone around the clock, and a full-year written guarantee on every job.
We also use GAF-compatible components by default. When a repair calls for matching shingles, ridge caps, or flashing, we use genuine GAF parts where it matters for warranty and wind-rating reasons. Where an aftermarket underlayment or sealant performs equally well and saves you money, we’ll say so plainly. No games. A roof either keeps water out or it doesn’t, everything else is just conversation.
Styles & brands we work with






Common GAF Roofing Problems We Fix in Dallas
Here are the GAF-specific failures we see regularly across Dallas, with the real cause behind each one.
- Timberline HDZ shingle delamination after hail impact. Hail doesn’t just dent shingles, it separates the granule layer from the asphalt mat. On south-facing slopes in Dallas, where the sun has already baked shingles through years of 100°F summers, hail hits land harder and delaminate more often. We see this every spring. The fix is targeted shingle replacement with matching Timberline HDZ stock, not a full reroof, unless the mat itself is exposed across wide areas.
- EverGuard TPO seam failures around rooftop penetrations. Dallas heat makes TPO membranes expand and contract aggressively. Around vents, curbs, and HVAC penetrations, that movement concentrates at the seam welds. After a few summers, seams open up and water finds its way in. We fix this by stripping back the failed seam, cleaning the membrane, and re-welding with proper TPO-compatible material, then checking every nearby penetration for stress.
- Grand Sequoia shingle nail pull-through at eaves and rakes. Grand Sequoia is a heavyweight shingle, which is good for impact resistance but tough on fasteners when Dallas winds get behind the edges. Wind uplift at the roof perimeter pulls shingles hard enough to yank nails through the shingle body. We find this on homes near open fields and along the east side of Dallas where spring fronts roll in fast. The repair is resecuring with GAF-recommended fasteners and checking the underlayment beneath.
- Timberline HDZ granule loss and curling on older roofs. Granule loss is normal with age, but Dallas accelerates it. UV at 100°F plus hail abrasion strips granules faster than the shingle’s design lifespan assumes. Once the asphalt mat shows through, the roof is near the end. If we catch it early, we patch. If the granule loss covers broad sections, we’ll tell you straight that replacement is the better money.
- Seal-A-Ridge cap failures at roof peaks. Ridge caps take more wind than any other shingle on a GAF roof. In Dallas, we’ve seen cap shingles lift and separate at the peak after strong line storms. The first sign is usually a small leak over a hallway or garage. We replace damaged Seal-A-Ridge caps with matching granules and resecure the adjoining field shingles so the roof’s wind rating holds.
Last spring, our tech responded to a leak over a Lake Highlands garage where a GAF Timberline HDZ roof had lost a ridge cap shingle. Wind-driven rain was getting under the felt. We removed the damaged cap, resecured the adjoining shingles with GAF-recommended nails, and installed a new Seal-A-Ridge cap with matching granules. The leak stopped, and the roof’s wind rating was restored. That’s the kind of repair you get when the tech knows the failure mode before the ladder goes up.
GAF Parts & Our Repair-vs-Replace Approach
We prefer genuine GAF components when repair quality and wind-warranty expectations demand it. Timberline shingles, Seal-A-Ridge caps, and EverGuard flashing all go on as GAF parts on our jobs. For underlayments and sealants, we’ll use proven aftermarket products where they perform equally well and cost you less. We’ll tell you which is which before you pay a dollar.
We stock common GAF Timberline colors locally for fast turnaround on shingle replacements. Ridge caps, sealants, and TPO membrane patch material ride on our trucks every day. That means most single-slope repairs in Dallas happen in one visit, not three.
Repair versus replace comes down to one thing: has the decking or membrane failed? If the sheathing is still solid and the leak is confined to flashing, a seam, or a handful of shingles, we patch and reseal. That extends the roof’s life and costs far less. If the decking is soft, the membrane is cracked through, or the granule loss has exposed the mat across large sections, we recommend replacement. We don’t sell roofs that aren’t needed. Call (903) 499-4441 and we’ll give you an honest read.
Our GAF Service Process – Step by Step
- 1
Diagnosis. We inspect the roof surface, flashing, penetrations, and attic where accessible. For GAF roofs, we’re checking for the common Dallas failure modes: hail delamination, seam stress, nail pull-through, and granule loss. We identify the exact GAF component that failed and why it failed here in Dallas.
- 2
Repair or install. We use genuine GAF shingles, caps, and flashing where it matters, and quality aftermarket underlayment and sealants where they perform equally. Every repair follows GAF fastener and placement specifications so the roof’s wind rating holds.
- 3
Test. After the repair, we water-test the area when possible and inspect from the attic to confirm no moisture is getting through. On flat EverGuard TPO repairs, we check every nearby seam and penetration for the same stress pattern.
- 4
Written guarantee. Every job comes with the 365-Day Done Right Promise in writing. If the repair or installation fails within one full year, we come back at no charge. No fine print, no phone tag. That’s the Garrison Code.
See the difference
Before
After
Before
After
Before
AfterGAF Products We Service & Install in Dallas
We service and install the full range of GAF residential and commercial roofing products common in Dallas. That includes Timberline HDZ and Timberline Ultra HD architectural shingles, Grand Sequoia heavyweight shingles, and EverGuard TPO flat roof membrane systems. We also work with GAF Seal-A-Ridge ridge caps and GAF flashing components on every applicable repair. Whether you have a pitched composition shingle roof on a 1980s ranch or a flat TPO roof on a commercial building near the Stemmons corridor, we work on it. We stock common Timberline colors locally and keep TPO patch material on our trucks for fast Dallas turnarounds.
We Also Service These Brands
GAF is a big part of our Dallas work, but it’s not the only brand we service. We also install and repair Owens Corning and CertainTeed roofs, and we work with products from IKO, Atlas, Tamko, and Boral. That multi-brand experience matters: it means we’re recommending the right product for your roof, not pushing the one brand we happen to stock.
FAQs – GAF Roofing Service in Dallas
Repairing a GAF Timberline roof with non-GAF shingles will not automatically void the entire GAF warranty, but it can void the warranty’s wind coverage on the repaired area if the replacement shingles don’t match GAF specifications. GAF publishes repair guidelines, and in most cases they require GAF-manufactured shingles for repairs to maintain full wind warranty protection. We use genuine GAF Timberline shingles on repairs for exactly this reason. If you have a specific warranty question, we’ll point you to the right page in your warranty document before any work starts.
GAF EverGuard TPO roofs leak around rooftop vents in Dallas because the membrane expands and contracts with Dallas temperature swings, which concentrates stress at the seams and flashings around penetrations. A vent flashing welded into the TPO field sees that movement almost every day during spring and fall, when Dallas swings 30 to 40 degrees between morning and afternoon. Over several seasons, the weld can separate and let water in. We fix these leaks by stripping the failed area, cleaning the membrane, and re-welding the penetration flashing, then checking nearby seams for the same stress. Call (903) 499-4441 and we’ll look at your roof.
Storm damage on a GAF Grand Sequoia roof shows up as localized impact marks, slipped or lifted shingles at the eaves and rakes, or nail pull-through after a known storm event. Normal wear shows up as even granule loss, gradual curling, and fading across the roof surface. If you can point to a specific storm date and the damage is clustered on one or two slopes, that’s likely storm-related. If the wear is even and the roof is past 20 years old, that’s age. We provide honest storm damage assessments in Dallas, and we’ll tell you which it is. Call (903) 499-4441 for a straight answer.
Patch a leaking GAF EverGuard TPO roof if the leak is confined to a seam, penetration, or small membrane area and the rest of the membrane still passes inspection. Replace the membrane if it’s cracking through across broad sections, the seams are failing in multiple places, or the insulation beneath is wet. In Dallas, a TPO roof that’s been through 10 or more summers often has multiple hidden seam issues, so we’ll inspect the full membrane before recommending either path. Either way, the written price comes before any work starts. Call (903) 499-4441 for an honest assessment.
GAF Timberline HDZ requires the nails specified in GAF’s installation instructions, and that specification matters more in Dallas than in most places. Dallas wind loads plus the thermal cycling of 100°F summers means nails that are too short, too thin, or placed incorrectly can pull through or back out, leaving shingles loose at the eaves and rakes. GAF specifies nail length, shank type, and placement for Timberline HDZ, and we follow those instructions on every repair. If a previous installer used the wrong fasteners, we fix that during the repair.
GAF roofing service in Dallas typically runs from $350 to $1,200 for most shingle repairs, depending on the scope. Here’s what we typically see:
- Single shingle or small patch repair: $350 to $600
- Ridge cap or flashing repair: $450 to $800
- Multiple slope repair or larger storm damage: $800 to $1,200
- EverGuard TPO flat roof patch: $600 to $1,400 depending on membrane area
- Full GAF roof replacement: varies by square footage and product line; we provide written quotes
These are ballpark ranges for Dallas, not a substitute for a written quote. We put the exact price on paper before any work starts, and it doesn’t move at the door. Call (903) 499-4441 for your free estimate.
Book Your GAF Service in Dallas, TX
If you have a GAF roof in Dallas that’s leaking, storm-damaged, or just past its prime, call Brennan Roofing Co Dallas at (903) 499-4441. We’ll send a background-checked, uniformed technician, put the written price in your hand before any work starts, and back the job with our 365-Day Done Right Promise.
Written by Travis Oakley, Owner at Brennan Roofing Co Dallas, serving Dallas since 2000.